dragonsniper04 - 4-28-2004 at 06:04 AM
i have been working on a few maps and testing them on my own the problem i am having is this one sniping map. i for some dam reason can't get my
ladders to line up. they are either to one side or they over lap. any ideas or suggestions would be of big help.
This should probably be in the Map Builders
7>Snake - 4-28-2004 at 08:26 AM
Forum.
However;
Do you have 'snap' selected in the grid (top left hand side of the med screen). If you do, try turning it off and fining tuning the location by first
zomming in on the objects then using the control-arrow keys to move it.
If using the 3-D wireframe view make sure you are zoomed in as well and adjust the position using the fine tune measurements for height, left, right,
forward and back position.
Review of the manual will explain these features in more detail.
RedNR - 4-28-2004 at 08:58 AM
Dragonsniper ive moved your post from the Delta Force Black Hawk Down forum to here...
And listen to Snake he has some good tips try them out.
it's ok..
Fireant - 4-28-2004 at 09:30 AM
I don't think its a dumb question at all, at least you asked. Snake suggested several things that will help. Maybe you need to get a little better
feel for the wireframe. And it's nice to hear your testing and trying to fix probs instead of giving up and slapping the map to the database. The last
few pages of the MED manual list all the controls, but to put it simply, when in wireframe, zoom in on the ladder and use 'shift' and your arrow keys
to raise and lower, and if want smaller adjustments use 'shift and ctrl' and the arrow keys. Hope that helps, keep workin with it.
Cheers.